Palmsens Multi-channel Potentiostat / Galvanostat / Impedance Analyzer
The MultiPalmSens4 is a flexible multi-channel potentiostat, galvanostat and impedance analyzer which you can fully tailor to your requirements and budget. The MultiTrace software allows for using each channel individually or simultaneously or running a sequence of automated tasks on each channel. Each channel provides an additional auxiliary port for controlling peripherals or monitoring temperature or other analog signals.
By enabling synchronization of channels and adjusting the setup of your cables, you can use the MultiPalmSens4 as a polypotentiostat. This means you can use multiple working electrodes, one counter and one reference electrode in the same cell at the same time. Your working electrodes all perform the same measurement.
Includes:
- 8GB on-board storage per channel
- MultiTrace for Windows
- Sensor cables with croc clips and a Dummy Cell
- AC adaptor and USB cable
- Manual and USB flash drive
- Carrying bag
Each channel can be configured with:
- ±5 V or ±10 V maximum potential range
- EIS/FRA with maximum frequency of 100 kHz or 1 MHz
- Bipotentiostat module for second WE
- iR-Compensation
- Galvanic isolation
Overview
Description & features of the product
Specification
Specification of the product
Product Enquiry
Enquire more about our product
Reviews
Reviews about the product
Overview
The MultiPalmSens4 is a flexible multi-channel potentiostat, galvanostat and impedance analyzer which you can fully tailor to your requirements and budget. The MultiTrace software allows for using each channel individually or simultaneously or running a sequence of automated tasks on each channel. Each channel provides an additional auxiliary port for controlling peripherals or monitoring temperature or other analog signals.
By enabling synchronization of channels and adjusting the setup of your cables, you can use the MultiPalmSens4 as a polypotentiostat. This means you can use multiple working electrodes, one counter and one reference electrode in the same cell at the same time. Your working electrodes all perform the same measurement.
Includes:
- 8GB on-board storage per channel
- MultiTrace for Windows
- Sensor cables with croc clips and a Dummy Cell
- AC adaptor and USB cable
- Manual and USB flash drive
- Carrying bag
Each channel can be configured with:
- ±5 V or ±10 V maximum potential range
- EIS/FRA with maximum frequency of 100 kHz or 1 MHz
- Bipotentiostat module for second WE
- iR-Compensation
- Galvanic isolation
Specifications
For each channel:
| configuration | PS4.F#.05 / PS4.F#.10 |
| dc-potential range | ±5 V – ±10 V |
| compliance voltage | ±10 V |
| maximum current | ±30 mA (typical) |
| max.acquisition rate | 150,000 data points/s |
Potentiostat (controlled potential mode)
| applied dc-potential resolution | 76.3 µV |
| applied potential accuracy | ≤ 0.1% ±1 mV offset |
| Current ranges | 100 pA to 10 mA (9 ranges) |
| current accuracy | < 0.2% of current ±10 pA ±0.1% of range |
| measured current resolution | 0.005 % of current range (18-bit 5 fA on 100 pA range) 0.0025% of 10 mA range |
Galvanostat (controlled current mode)
| current ranges | 1 nA to 10 mA (8 ranges) |
| applied dc-current | ±6 times applied current range |
| applied dc-current resolution | 0.0076% of applied current range (<10 mA) 0.0038% of 10 mA range |
| applied dc-current accuracy | < 0.2% of current ±10 pA ±0.1% of range |
| potential ranges | 10 mV, 100 mV, 1 V |
| measured dc-potential resolution | 78.13 μV at ±10 V 7.813 μV at ±1 V 0.7813 μV at ±0.1 V |
| measured dc-potential accuracy | ≤ 0.05% or ±1 mV (for |E| < ±9 V) ≤ 0.2% (for |E| ≥ ±9 V) |
Special functions / Dimensions
| housing | 15 x 25 x 25 cm3 |
| weight | +/- 4 kg |
| temperature range | 0 ºC to + 50 ºC |
| power supply | External 12V AC/DC adapter |
| communication | USB |
| internal storage space | 8 GB per channel or +/- 800000 measurements incl. method info (assuming 200 data points per measurement) |