Hermle OLEUM Oil-Test Centrifuge (230V 50Hz)
As a compact tabletop unit, the OLEUM centrifuge is used for oil test methods. Therefore, water content in the mineral oil is examined. The OLEUM centrifuge comes with a four-place swing-out rotor which accommodates cushions for oil test tubes according to ASTM: Conical or Pearshaped form.
• Microprocessor with large LCD display
• Brushless induction drive
• Motor-driven lid lock
• Audible signal at the end of each run
• Quick access to samples
• Active imbalance identification and cut-off
• Noise level < 55 dBA, at max. speed
• Easy removal of rotor, without tools
• Emergency lid lock
• Stainless steel chamber
• Safety Regulations, i.e. IEC 61010
Display functions
• Diagnostic program
• Program memory for 99 programs
• Quick-key for short runs
• 10 acceleration and 10 deceleration rates
• possibility of unbraked deceleration
• Permanent indication of preset and actual values
• Pre-selection of speed or RCF in steps of 50/10 increments
• Pre-selection of running time from 10 sec to 99h 59min or continuous
• Simple operation with turning knob
Overview
Description & features of the product
Specification
Specification of the product
Product Enquiry
Enquire more about our product
Reviews
Reviews about the product
Overview
As a compact tabletop unit, the OLEUM centrifuge is used for oil test methods. Therefore, water content in the mineral oil is examined. The OLEUM centrifuge comes with a four-place swing-out rotor which accommodates cushions for oil test tubes according to ASTM: Conical or Pearshaped form.
• Microprocessor with large LCD display
• Brushless induction drive
• Motor-driven lid lock
• Audible signal at the end of each run
• Quick access to samples
• Active imbalance identification and cut-off
• Noise level < 55 dBA, at max. speed
• Easy removal of rotor, without tools
• Emergency lid lock
• Stainless steel chamber
• Safety Regulations, i.e. IEC 61010
Display functions
• Diagnostic program
• Program memory for 99 programs
• Quick-key for short runs
• 10 acceleration and 10 deceleration rates
• possibility of unbraked deceleration
• Permanent indication of preset and actual values
• Pre-selection of speed or RCF in steps of 50/10 increments
• Pre-selection of running time from 10 sec to 99h 59min or continuous
• Simple operation with turning knob
Specifications
Specifications
| max. Speed | 3,000 rpm |
| max. RCF | 2,213 xg |
| max. Volume | 4 x 100 ml |
| Speed range | 200 – 3,000 rpm |
| Running time | 59 min 50 s / 10 s increments 99 h 59 min / 1 min increments |
| Dimensions (WxHxD) | 56 x 41 x 64 cm |
| Weight | 72 kg |